| Title |
Author |
Co-Author(s) |
Affiliation |
| Implementation of an equivalent continuum consititutive model for rock masses with systematic joint sets in FLAC3D |
Agharazi, A. |
D.D. Tannant & C.D. Martin |
University of Alberta, Dept. of Civil & Environmental Engineering |
| DEM modeling techniques for dynamic analysis of ballasted railway track |
Aikawa, A. |
|
Railway Technical Research Institute |
| Physical and numerical investigation of conglomeratic rocks |
Akram, M.S. |
G. Sharrock & R. Mitra |
University of New South Wales, School of Mining Engineering |
| The role of interstitial cement in synthetic conglomeratic rocks |
Akram, M.S. |
G. Sharrock & R. Mitra |
University of New South Wales, School of Mining Engineering |
| Numerical modeling of jointed artificial rock under uniaxial loading |
Alzo'ubi, A.K. |
C.D. Martin & O.S. Mughieda |
University of Alberta |
| Applications of the NTUA-SAND model for the seismic liquefaction analysis of geostructures |
Andrianopoulos, K.I. |
A.G. Papadimitriou & G.D. Bouckovalas |
University of Thessaly, Dept. of Civil Engineering |
| Explicit three-dimensional analysis of structurally-controlled unravelling in large excavations |
Andrieux, P. |
A. Turichshev, L. Cotesta, J. Fedorowich & R. Brummer |
Itasca Consulting Canada, Inc. |
| Underground tramway passage under a railway station at Viroflay |
Antoinet, E. |
M. Senis, D. Billaux & D. Genevey |
Antea |
| PFC2D simulation of directionality in rough fractures shear strength |
Asadi, M.S. |
V. Rasouli |
Curtin University of Technology |
| A comparison of physical and numerical experiments on artificial jointed rock masses using PFC3D |
Bahaaddini, M. |
G. Sharrock & B.K. Hebblewhite |
University of New South Wales, School of Mining Engineering |
| Dynamic analyses of mountain response using PFC3D and FLAC3D |
Bazgard, A. |
P.A. Cundall & T.R. Davies |
University of Canterbury, Geological Sciences Department |
| The influence of three-dimensional kinematic controls on rock slope stability |
Brideau, M.-A. |
D. Stead |
Univ. of Auckland |
| The fracture analysis of RC box-culvert by distinct element method |
Cao, G.Q. |
K. Kawaji |
ITOCHU Techno-Solutions Corporation |
| Fully non-linear dynamic analysis on post-liquified sand based on modified Finn model |
Chen, Y. |
H. Liu |
Hohai University, Civil and Transportation Engineering |
| 3DEC modeling of the effect of joints on lateral capacity of socketed pile in laboratory conditions |
Chong, W.L. |
A. Haque, P.G. Ranjith & A. Shahinuzzaman |
Monash University, Dept. of Civil Engineering |
| Simulation of rock mass strength using Ubiquitous Joints in 3D |
Clark, I.H. |
|
GEONET Consulting Group |
| Triaxial and cone penetration tests in a discrete analogue of Toyoura sand |
Climent, N. |
J. Butlanska, M. Arroyo & A. Gens |
Technical University of Catalonia |
| Numerically established post-cracking response of a pile under horizontal loading |
Comodromos, E.M. |
M.C. Papadopoulou |
University of Thessaly |
| Remedial design of steel arch support for an ore pile tunnel using FLAC |
Corkum, A.G. |
L.J. Lorig & M. Ruest |
Itasca Consulting Group, Inc. |
| Stability of a massive embankment on a soft foundation subject to creep Coucke |
Coucke, N. |
N. Charue & G. Buchet |
Technum - Tractebel Engienering |
| Warf retaining wall geotechnical and structural capacity assessment |
Dai, C. |
|
AECOM Australia |
| A parallel Iwan model for 3D cyclic loading of cohesive materials |
Dawson, E. |
|
URS Corporation |
| Estimation of tunnel squeezing in anisotropic stress fields using a FLAC-based neural network |
DeGagne, D.O. |
A.G. Corkum & L.J. Lorig |
Itasca Consulting Group, Inc. |
| Factor of safety measure for Hoek-Brown material |
Detournay, C. |
P. Varona & R.D. Hart |
Itasca Consulting Group, Inc. |
| Modeling of Nevada Sand behavior using CHSOIL |
Detournay, C. |
Z. Wang & Y. Han |
Itasca Consulting Group, Inc. |
| Comparative particle attrition study for transfer chutes using DEM |
Donohue, T.J. |
D. Ilic & W. McBride |
The University of Newcastle |
| DEM study of a scale model bucket wheel reclaimer |
Donohue, T.J. |
P. Robinson & C.A. Wheeler |
The University of Newcastle |
| Simulations of elastic wave propagation using FLAC to optimize the measurement of shear wave velocity in the laboratory |
Ethier, Y. |
M. Karray & G. Lefebvre |
Universite de Sherbrooke |
| Numerical modeling of rock blasting: Validation tests for Blo-Up 2.5 |
Furtney, J.K. |
P.A. Cundall, I. Onederra & E. Sellers |
Itasca Consulting Group, Inc. |
| The analysis of stress-strain state of the earth's crust of Dagestan inferred from GPS measurements |
Garagash, I.A. |
A.V. Dubovskaya |
Institute of the Earth Physics |
| Computer-aided calibration of PFC3D coal samples using a genetic algorithm |
Garvey, R. |
U. Ozbay |
Colorado School of Mines |
| Discrete Element Modeling of cylindrical cavity expansion of granular materials using PFC |
Geng, Y. |
H-S. Yu & G. McDowell |
University of Nottingham |
| Seismic response and dynamic deformation analysis of Sar-Cheshmeh tailings dam |
Ghahreman Nejad, B. |
H. Taiebat, C. Noske & D. Murphy |
ATC Williams Pty Ltd |
| Numerical analysis of twin road tunnels using two- and three-dimensional modeling techniques |
Ghee, E.H.. |
B.T. Zhu & D.R. Wines |
Itasca Australia Pty Ltd. |
| Advanced numerical modeling in tunnel design |
Goit, C.S. |
A. Kovacs & A.H. Thomas |
Mott MacDonald |
| Seismic analysis of large underground structures using FLAC3D |
Gregor, T. |
R. Shobayry |
Hatch Mott MacDonald |
| Coupling the lattice Boltzmann method with PFC. Part I: Verification of LBM as a hydrodynamic code |
Han, Y. |
P.A. Cundall |
Itasca Consulting Group, Inc. |
| Coupling the lattice Boltzmann method with PFC. Part II: Verification and simple applications of PFC-LBM coupling |
Han, Y. |
P.A. Cundall |
Itasca Consulting Group, Inc. |
| Implications of prescriptive boundaries for the investigation of tectonic processes |
Harper, T.R. |
|
Geosphere Limited |
| PFC2D analysis of H-V reinforcement on bearing capacity of sand-beds subjected to strip loading |
Hou, J. |
M. Zhang & L. Wang |
Shanghai University, Dept. of Civil Engineering |
| Application of DEM in the analysis of bulk solid interactions in belt conveying systems |
Ilic, D. |
T. Donohue, A. Katterfeld & C. Wheeler |
University of Newcastle, Tunra Bulk Solids |
| Large-strain, rezoned-mesh FLAC analysis of embankment post-liquefaction performance |
Jacka, M.E. |
P.D. Norfolk |
Tonkin & Taylor Ltd. |
| Effective stress seismic deformation analysis of Hamata Tailings Dam |
Jitno, H. |
P.M. Byrne |
Morobe Mine Joint Venture |
| Coupling ANSYS and PFC3D for the simulation of the conveyor belt deflection |
Katterfeld, A. |
M. Dratt & C. Wheeler |
Universitat Magdeburg |
| Coupled discrete element and multibody simulation for analysis of the operation of construction machines |
Katterfeld, A. |
G. Kunze & T. Gruening |
Universitat Magdeburg |
| Deformation mode and stress state in direct shear test |
Kim, B.S. |
T. Sakakibara, S.W. Park & S. Kato |
Kobe University, Dept. of Civil Engineering |
| Use of UDEC interfaces to model cohesive cracks in geomaterials |
Kodikara, J.K. |
A.L. Amarasiri |
Monash University, Dept. of Civil Engineering |
| Numerical analysis of methane migration from floor strata to a longwall face |
Kwasniewski, M. |
S. Lasek |
Silesian University of Technology |
| The role of particle breakage in soil creep |
Kwok, C.Y. |
M.D. Bolton |
University of Hong Kong, Dept. of Civil Engineering |
| Improving rock stress measurements using stochastic numerical modeling of heterogeneity |
Leite, M.H. |
R. Corthesy & V. Boivin |
Ecole Polytechnique Montreal |
| Numerical calculations for the design of a gas cavern in rock salt with FLAC3D |
Leuger, B. |
K. Staudtmeister & D. Zapf |
Leibniz Univ. Hannover, Inst. fur Unterirdisches Bauen |
| FLAC3D modeling of deep foundation pit excavation near a subway station |
Liu, B. |
C. Yang, T. Li, Y. Han & Y. Zhou |
China University of Mining & Technology
|
| Cap-Yield model with cohesion, back analysis of real excavations |
Lucarelli, A. |
G. Guiducci, G. Furlani & R. Sorge |
Studio Sintesi |
| Seismic stability analyses of a hydraulic fill dam using a critical state based soil model in FLAC & FLAC3D |
Ma, F.-G. |
Z.-L. Wang & J. LaVassar |
AMEC Geomatrix, Inc. |
| Micro and macro modeling of erosion with grading effect on critical state |
Maeda, K. |
D. Muir Wood & A. Kondo |
Nagoya Institute of Technology, Dept. of Civil Engineering |
| Static behavior of a tunnel built in very soft clay |
Mayoral, J.M. |
F.A. Flores |
Univ. Nacional Autonoma de Mexico (UNAM), Institute of Engineering |
| Ground motion variability effects in the seismic response of an overpass |
Mayoral, J.M. |
Ramirez, J.Z. & F.A. Flores |
Univ. Nacional Autonoma de Mexico (UNAM), Institute of Engineering |
| Analysis of the results of a DEM simulation using self-organizing maps |
Miyakawa, A. |
T. Tsuji, Y. Yamada, & T. Matsuoka |
Kyoto University |
| Evaluation of PFC2D for modeling seismic monitoring of hydraulic fracture |
Nabipour, A. |
B. Evans, T. Muller & M. Sarmadivaleh |
Curtin Univeristy of Technology, Dept. of Petroleum Engineering |
| Use of FLAC3D for mining induced seismicity prediction |
Nazimiko, V.V. |
K.V. Babenko |
Donetsk National Technical University |
| Three-dimensional analysis of micropile foundations using FLAC3D |
Nezami, E.G. |
R.A. Mikhail & N.G. Salisbury |
Landau Associates, Inc. |
| FLAC analysis of two-tiered cantilever embedded retaining walls |
Ni, B. |
|
Opus International Consultants, Ltd. |
| Soft ground improved by rigid vertical piles: Numerical study of an experimental embankment |
Nunez, M.A. |
D. Dias & L. Briancon |
INSA de Lyon |
| Discontinuum rock mass modeling in tunneling |
Oliveira, D.A.F. |
B. Indratana |
Coffey Geotechnics |
| Detailed three-dimensional stress analysis of complex orebody geometry - model setup and results for the Malmberget Mine |
Perman, F. |
J. Sjoberg & C. Dahner |
Vattenfall Power Consultant AB |
| Parallel-bond refinements to match macroproperties of hard rock |
Potyondy, D.O. |
|
Itasca Consulting Group, Inc. |
| Spatial searching and contact detection in PFC 5.0 |
Purvance, M.D. |
D. Russell, D. Potyondy & S. Emam |
Itasca Consulting Group, Inc. |
| A systematic approach to rock mechanics challenges at Xstrata Zinc Brunswick Mine |
Rose, B. |
M. Verreault, P. Andrieux & C. O'Connor |
Xstrata Zinc, Brunswick Mine |
| A historical review of the development of numerical cave propagation simulations |
Sainsbury, B.L. |
D.P. Sainsbury & M.E. Pierce |
Itasca Australia Pty Ltd. |
| Investigation of extreme deformation at the N3500 Project |
Sainsbury, D.P. |
A. Grubb |
Itasca Australia Pty Ltd. |
| Effects of grain shape on mechanical behaviors of granular material under plane strain condition in 3D DEM analyses |
Sakakibara, T. |
S. Shibuya & S. Kato |
ITOCHU Techno-Solutions Corp. |
| A PFC2D simulation of hydraulic fracture and natural interface interaction |
Sarmadivaleh, M. |
V. Rasouli & A. Nabipour |
Curtin University of Technology, Dept. of Petroleum Engineering |
| Geomechanical characterization and 3D numerical modeling of complex rock masses: a slope stability analysis in Italy |
Sciarra, N. |
M. Calista, D. Marchetti, G. D'Amato Avanzi, A. Pochini & A. Puccinelli |
University of Pisa, Dept. of Earth Science |
| Numerical modeling of restrained clay desiccation shrinkage using FLAC3D |
Shannon, B.M. |
P. Rajeev & J.K. Kodiakra |
Monash University, Dept. of Civil Engineering |
| Numerical analysis of subsidence for Perseverance Deeps Block Cave |
Sharrock, G. |
A. Vakili, P. Duplancic & N. Hastings |
University of New South Wales |
| Calculation of lateral earth pressures with layered backfill |
Shiau, J.S. |
C.A. Smith |
Univ. of Southern Queensland, Faculty of Engineering & Surveying |
| Modeling uplift of plate anchor |
Shiau, J.S. |
M.A. Hobson |
Univ. of Southern Queensland, Faculty of Engineering & Surveying |
| Discrete modeling of near-well thermo-mechanical behavior during CO2 injection |
Shiu, W.J. |
F. Dedecker, X. Rachez & M. Peter-Borie |
Itasca Consultants S.A.S. |
| Forensic analysis of a rock burst event at the Kiirunavaara Mine — Results and implications for the future |
Sjoberg, J. |
C. Dahner, F. Perman & L. Malmgren |
LKAB |
| Comparison of dynamic response from equivalent-linear and cyclic non-linear models of hysteretic soil behavior |
Strenk, P.M. |
J. Wartman |
Drexel University |
| Automatic clump generation based on mid-surface |
Taghavi, R. |
|
Itasca Consulting Group, Inc. |
| Modeling flow of a fragmented rock with 3DEC: A polyhedral DEM approach |
Taghavi, R. |
M. Pierce |
Itasca Consulting Group, Inc. |
| Investigation of the Synthetic Rock Mass approach for the consideration of reservoir behavior |
Thompson, N. |
D. Mas Ivars, H.T. Alassi & S. Pradhan |
Norwegian Univ. of Science and Technology |
| UDEC modeling in granitic rock |
Varo, A. |
A. Kovacs & A.H. Thomas |
Mott MacDonald |
| Study of soil resistance to rigid pile using DEM |
Wang, D. |
T.M.H. Lok |
University of Macau |
| Analysis on deformation and failure of surface borehole and casing due to coal extraction |
Wang, T. |
Q. Lv, Y. Zhou, Y. Li, C. Jiang & F. Yang |
Wu Han University, Water Resource & Hydropower Eng. |
| A continuum representation and validation of time-dependent crack growth behavior of brittle rock |
Wu, J.Y. |
Zhu, Y.S. & Zhu, H.C. |
Itasca Consulting China, Ltd. |
| Dynamic behavior of a 170 m high rockfill dam on a highly seismic area |
Yildiz, E. |
R. Guner |
Temelsu International Engineering Services Inc. |
| Bonded particle model simulation of laboratory rock tests for granite using particle clumping and contact unbonding |
Yoon, J.S. |
S. Jeon, A. Zang, O. Stephansson & M.Z. Hou |
Energy Research Centre of Lower Saxony |
| Stability and deformation analysis of an anchored deep cut slope in fractured and jointed rock |
Zhai, E. |
|
Kleinfelder, Inc. |
| PFC modeling and application of complex mechanic behaviors of Jinping marble |
Zhu, Y.S. |
J.Y. Wu, H.C. Zhu, H. Li & G.T. Meng |
Itasca Consulting China, Ltd. |
